Chemical industry, process automation

Request download links

On-line inspection of sealing compound in covering lid

After injection of the sealing compound in the covering lid, curing takes place in the tunnel furnace. Here, fault points and faulty thicknesses of compound must be acquired and faulty lids must be sorted ...

Detaljer

Extruder bore diameter

The idiamCONTROL system has been developed for checking the wear of extruder bores. The measuring cylinder is inserted in the case bore and pushed as far as the upper end. During retraction of the cylinder, ...

Detaljer

Absolute and continuous filling-level measurement

Continuous acquisition of the level must be ensured for high precision monitoring of filling levels. These requirements can be obtained with a MICROEPSILON vipSENSOR element whereby the actual sensor is ...

Detaljer

Control and monitoring of the production sequence in a refinery

In the refinery crude oil is cracked by distillation to give petroleum, kerosene and diesel oil. In the fractional distillation column the crude oil is heated with superheated steam. The vapors and liquids ...

Detaljer

Layer thickness measurement (non contacting)

Layer thickness measurement belongs to the group of one-sided, non-contact thickness measurement. Basically, only the layer thickness of electrical insulators can be measured for opaque objects. An eddy ...

Detaljer

Filling level

A filling level measurement situation can arise with a liquid substance as well as with dry, bulky goods. The precise measurement of liquid levels is difficult to achieve, nevertheless, the confocal measuring ...

Detaljer

Active damping of liquid-cooled centrifuges

At certain configurations of speed, filling level and design parameters, liquid-filled industrial centrifuges tend to produce unstable running characteristics which can lead to failure of the centrifuge. ...

Detaljer
info@micro-epsilon.se