Thickness profile measurement of blown films (non-contact and contact measurement 10µm to 500µm) The systems of the BTS 8104 family are designed as reversing systems and are based on the capacitive technology. They are directly applied immediately behind the calibration cage on the bubble and therefore offer a very fast and efficient control. Adaptive reversing speed allows an ideal adjusting of the measurement to each step of the extrusion process. Therefore, these systems present the basis for a perfect film production regarding quality and material input. Advantages: 100 % non-contact and contact capacitive measurement methods Different coating for different film types Adaptive reversing speed to ensure fast controlling No consequential costs due to isotopes or X-rays Short control loop ensured by measurement on the bubble Material parameter: Thickness up to 300µm (reversing) and 500µm (traversing), non conductive material Width from 255mm to 3600mm (double flat) Bubble vibration (horizontal) up to 10Hz (non-contact sensor, reversing - BTS 8101NC) Different sensor coatings allow measurements on different film types The BTS family are designed as reversing and traversing measurement systems equipped with capacitive sensors. The innovative technology allows extreme precise measurements for increased production efficiency. BTS 8104.NC The non-contact version thicknessCONTROL BTS 8104.NC is based on a patented pneumatic position control. This version works with the non-contact air bearing technology which allows a perfect compensation of the movement on the bubble. Features: 100% non-contact measurement Resolution <0.1 µm No calibration necessary during measurement Nedladdningar Catalogue "Measuring and inspection systems for plastics processing industry" (PDF, 2.11 MB) BTS 8104.C The BTS 8104.C is designed for reversing measurements after the extrusion. The capacitive sensor is available with different coatings. Features: Resolution <0.1 µm Without reverse-frame the sensor can be used for measurement on flat films No calibration necessary during measurement Nedladdningar Catalogue "Measuring and inspection systems for plastics processing industry" (PDF, 2.11 MB) BTS 8100.C The BTS 8104.C is designed for measurements on flat films. The capacitive sensor is easy to adapt in existing process lines. Features: Resolution <0.1µm Nedladdningar Catalogue "Measuring and inspection systems for plastics processing industry" (PDF, 2.11 MB) back to product group "Mät- och kontrollsystem för plaster"