Automotive production

Colour recognition for seams in automotive interiors

A well-known German car manufacturer relies on poka-yoke mechanisms for assembling interior components. The poka-yoke process prevents product defects due to random human errors and ensures that all parts ...

Detaljer

Color measurement of liquid paint

Measuring the color of liquid paint is extremely complex. To date, paints have been typically applied on a test area first and then measured only after the drying process in order to achieve reliable measurement ...

Detaljer

Colour and intensity tests of vehicle lights

At the end of their production process, vehicle lights must be 100% inspected. Colour and intensity of the finished lights are the primary inspection criteria. Homogenous distribution of light should also ...

Detaljer

Colour comparison between parking sensor and body shell

Car attachments such as parking sensors are painted separately. However, during assembly there must be no difference in colour between the parking sensor and the bumper, which means the two colours must ...

Detaljer

Inline burr measurement on sheet edges in body manufacture

In order to avoid corrosion, continuous and error-free corrosion protection is a critical factor in the painting process. As the thickness of the applied painting on burrs can only be determined under ...

Detaljer

Adhesive beading check on border strip

Border strips are automatically adhered to glass by robots in vehicle production. This automatic process must be monitored as the application of uniform adhesive beading by the robot is not certain. The ...

Detaljer

Robot positioning for application of seals

In order to permanently protect weld seams against the penetration of moisture, BMW AG’s Leipzig factory seals the weld seam on the roof rail. A robot automatically applies sealant at the position ...

Detaljer

Adhesive beading check

It is important during the gluing in of glass panes in automobile production that the adhesive beading shows a constant track. Therefore a robot arm tracks the adhesive beading track exactly with a scanCONTROL ...

Detaljer

Dosing systems for high-viscosity glues

In the automotive industry piston dosing systems are used for glueing car windscreens and windows. These dosing systems supply the highviscosity glue to the application gun in an exactly controllable way. ...

Detaljer

Paintwork defects

The exterior appearance is an important factor for many surfaces. The reflectCONTROL inspection system is suitable for automatic defect inspection of reflecting surfaces. This system measures the quality ...

Detaljer

Measuring the base height of filters in the automotive industry

In automotive filter production, faultless workmanship is essential for the proper functioning of the filter. In addition, the specified height of the filter is also critical in order to prevent any damage ...

Detaljer

Automatic positioning of synchroniser discs

Synchroniser discs are used as a synchroniser package in automatic transmissions. Behr Systems in Germany created a handling and processing plant for deburring the front side of the synchroniser discs ...

Detaljer

Stitching position of airbags

As interior parts, the covers must therefore harmonise with the overall appearance. The high aesthetic requirements placed on the cockpit, seats, interior trim and steering wheel are particularly important ...

Detaljer

Inspecting gaps in car trims

In high quality vehicles, the trim typically consists not only of a single material (e.g. plastics) but many different bonded materials. This offers various design options but also many additional functions ...

Detaljer

Gap measurement of tripping pins

When triggering a switching operation in test equipment for camshafts, a tripping pin is moved at high speed. A gap measurement detects whether the tripping pin has been completely extended and if ...

Detaljer

Gap monitoring in car interiors

Car interiors present a number of gaps, for example, between the single cockpit elements such as the centre console or door trim. From a technical point of view, it is often irrelevant if the width and ...

Detaljer

Gap and flushness measurement of car bodywork parts

The demands on car bodywork are increasing, not only from a technical viewpoint, but also with regards to the optical design. Therefore, a door that doesn’t close flush could fulfill the technical ...

Detaljer

TIM 160 for injection mould applications

Users of injection  mould machines for plastics processing are facing increased quality requirements imposed by end-users, in particular  for  automotive applications. Because of this trend, the importance ...

Detaljer

Monitoring embossment depth

Embossed serial numbers enable worldwide unambiguous identification of, for example, car body shells. For increased safety measures (e.g. in case of theft), car body IDs are punched into the vehicle frame. ...

Detaljer

Distinction of brake discs

When processing car brake discs, the correct brake disc must be chosen before each stage of production in order to assign them to the manufacturer's different models. Laser scanners are used to recognise ...

Detaljer

Windscreen defects

During the production of windscreens, it can happen that the correct curvature of the windscreen has not been maintained or the fissures and cracks in the surface make the windscreen unusable. A system ...

Detaljer

Windscreen profile

Flat glass for demanding industrial tasks is subjected to 100% testing after the production. Dimensional accuracy is important for industrial glass which is used for demanding technical tasks. Examples ...

Detaljer

MICRO-EPSILON SENSOTEST AB
Girovägen 13
17562 Järfälla
info@micro-epsilon.se
+46 / 8564 / 733-80
+46 / 8564 / 733-89